SC10 1/10 4WD Brushless RC Monster Truck
Take your driving off-road with HOBBYWING brushless power, gyro-assisted steering and all-terrain tires. The SC10 is built for outdoor fun on dirt, gravel and short grass.


Drive System
4WD


2.4 GHz 5-Channel
Remote Controller
55MM(Max)
Ground Clearance
9.7:1
Reduction Gear Ratio


3S 30C LiPo Battery 3000mAh


10BL60 RTR G2 60A
Sensorless Brushless ESC


3652 2800KV
Motor


Full Waterproof Metal


257mm
Wheelbase


80km/h
Speed
Built-in gyro steering assistance


Brushless power from HOBBYWING
3652 2800KV brushless motor paired with a 60A ESC. A 3S LiPo battery powers the system, while a motor heat sink and cooling fan help manage heat during your run.


Up to 80 km/h with high-speed gearing
Rated for up to 80 km/h (49.7 mph) with high-speed gearing installed. Replacing the standard gearing is required; actual speed varies with setup, battery condition and driving surface.


Three differentials, each with all-metal gears
Front, center and rear differentials feature all-metal gears. They accommodate differences in wheel and axle speeds as the truck turns and moves across changing surfaces.


For drivers who enjoy the hands-on side of RC
For drivers who enjoy outdoor RC driving and hands-on maintenance, the SC10 combines brushless power, 4WD and accessible hardware.


| Specification | SC10 |
|---|---|
| Model | SC10 |
| Vehicle type | RC monster truck |
| Scale | 1/10 |
| Drive system | 4WD |
| Motor | HOBBYWING 3652 2800KV sensorless brushless motor, with heat sink and cooling fan |
| ESC | HOBBYWING WP 10BL60 RTR G2 60A sensorless brushless ESC |
| Battery specification | 3S 30C 3000mAh hard-case LiPo |
| Radio system | 2.4 GHz transmitter with gyro-equipped receiver |
| Steering servo | 15 kg·cm waterproof metal-gear servo |
| Chassis | Nylon composite |
| Shocks | Metal-bodied, long-travel, oil-filled shocks |
| Differentials | Front, center and rear differentials with all-metal gears |
| Tires | 110 × 55 mm all-terrain tires |
| Body | Quick-release polycarbonate body |
| Dimensions | 423 × 318 × 162 mm — approximately 16.7 × 12.5 × 6.4 in |
| Wheelbase | 257 mm — approximately 10.1 in |
| Vehicle weight | 2.7 kg — approximately 5.95 lb, without battery |
| Battery compartment | 140 × 48 mm footprint; height adjustable to 25 mm or 35 mm |
| Maximum speed | Up to 80 km/h (49.7 mph) with high-speed gearing installed; a change from the standard gearing is required |
1. Tax
-No Customs Fees for USA and European Orders
Most parcels are shipped from local warehouses, so no customs fees are usually required.
- Customs Fees for South American and Southeast Asian Orders
Orders to South American and Southeast Asian countries are shipped from China and may incur import taxes as per local customs regulations.
2. Returns & Refunds
Eligible items can be returned within 30 days after delivery. Please keep the product and packaging in good condition.
3. Warranty & Support
For product questions, order information, or warranty support, please contact us through the Contact page.
Battery and charging help: If the battery does not charge normally, follow the drone battery charging checklist or contact TODAMU support before attempting another flight.
Calibration help: If the aircraft requests IMU, compass, or gimbal calibration, follow the drone calibration guide or contact TODAMU support before flying.
Is the camera horizon tilted?
Remove the gimbal cover, restart the drone on a firm level surface, and let the startup self-check finish. If the horizon remains tilted, use the gimbal alignment and calibration checklist.
GPS signal weak or home point not ready?
Move the drone to open sky, keep it still while it searches for satellites, and wait for the normal GPS-ready and home-point status. If the warning remains, use the TODAMU weak GPS signal checklist.

Collections
-
Drones with 3 Axis Gimbal
Drones with 3 axis gimbal are designed to deliver smoother and more...
-
Obstacle Avoidance Drones
Obstacle avoidance drones are built to improve flight safety by detecting and...













