48MP + 12MP Dual CMOS Cameras
WindVision Optic Pro is a photography-focused dual-camera drone built around two dedicated CMOS sensors: a 48MP 1/2-inch CMOS main camera and a separate 12MP 1/3-inch CMOS telephoto camera. Capture wide aerial landscapes, tighter telephoto compositions and distant subjects with up to 10X zoom. The imaging system supports 8K Photo and 4K Video for detailed aerial photography and video.

Capture wider aerial scenes and high-resolution photos up to 8000 × 6000 pixels, with more room to preserve fine landscape, architecture and outdoor detail.
F1.8 aperture · 68.5° field of view
Switch to the telephoto camera when a distant building, landmark or landscape feature needs to fill more of the frame.
Dedicated telephoto camera
Two Cameras. Two Ways to Frame the Scene.
Use the 48MP main camera when you want to capture the full landscape, then switch to the 12MP telephoto camera for a tighter view of a distant subject. The dual-camera system gives you more flexibility when composing aerial photos without relying on one camera for every shot.


Up to 10X Zoom
Start with the surrounding scenery, then tighten the composition around a building, ridge, landmark or other distant subject. Up to 10X zoom gives you more control over framing while the drone remains in the air.
8K Photo, 4K Video
Capture high-resolution photos up to 8000 × 6000 and record video up to 3840 × 2160 at 30fps. The main camera supports a maximum video bitrate of up to 60Mbps, helping preserve more detail in aerial footage.


3-Axis Gimbal + EIS
A 3-axis brushless mechanical gimbal works with EIS electronic stabilization to help reduce visible camera shake while the drone is moving. The gimbal supports a 20° roll angle and 90° pitch angle for more control over the camera direction.
Up to 6KM Digital Transmission
Keep the live camera view on the controller while you compose aerial shots. Digital control and image transmission reach up to approximately 6KM in open, unobstructed and low-interference conditions.

GPS + TOF + Optical Flow Positioning
WindVision Optic Pro combines GPS positioning, downward TOF sensing and optical-flow positioning to support stable hovering and more controlled flight at different heights.


Smart Flight Modes
Use automatic flight modes to add movement to aerial footage without manually steering every part of the shot.
5.5-Inch Touchscreen Controller
No phone is needed for the flight screen. View the live camera feed, control the drone and adjust camera functions directly on the included 5.5-inch touchscreen controller.

Approx. 50 Minutes per Battery
The 11.4V 6000mAh flight battery provides approximately 50 minutes of flight time under suitable conditions, giving you more time to compose photos, change camera perspectives and record longer aerial sequences.
Who Is WindVision Optic Pro Best For?
WindVision Optic Pro is best suited to aerial photography, travel shooting and outdoor creators who want more flexibility when framing both wide scenes and distant subjects.
Aerial Photography
Landscapes, architecture, coastlines, scenic overlooks and detailed photos from above.
Travel & Landscape Shooting
Mountains, beaches, road trips, hiking viewpoints and other open outdoor locations.
Distant Buildings & Landmarks
Useful when you want a tighter composition of subjects that appear small in a wider aerial view.
Outdoor Content Creation
Suitable for creators shooting travel clips, landscape video and planned aerial sequences.
Common Use Cases
Related Guides & Collections
WindVision Optic Pro FAQ
Q: Does WindVision Optic Pro have two cameras?
Yes. It uses a 48MP main camera with a 1/2-inch CMOS sensor and a separate 12MP telephoto camera with a 1/3-inch CMOS sensor.
Q: What is the difference between the two cameras?
The 48MP main camera is used for wider aerial scenes and high-resolution photography. The 12MP telephoto camera provides a tighter view when the subject is farther from the drone.
Q: How much zoom does WindVision Optic Pro support?
The dual-camera imaging system supports up to 10X zoom, giving you more flexibility when framing distant landscapes, buildings and outdoor subjects.
Q: Does WindVision Optic Pro shoot 8K photos and 4K video?
Yes. The main camera captures photos up to 8000 × 6000 and records video up to 3840 × 2160 at 30fps, with a maximum video bitrate of up to 60Mbps.
Q: How is the camera stabilized?
A three-axis brushless mechanical gimbal works with EIS electronic stabilization to help reduce visible shake during flight.
Q: Do I need a phone to fly the drone?
No. The included 5.5-inch touchscreen controller displays the live camera feed and provides flight and camera controls directly on the remote.
Q: How far can the digital transmission reach?
Digital control and image transmission reach up to approximately 6KM in open, unobstructed and low-interference conditions.
Q: How long does one flight battery last?
The 11.4V 6000mAh flight battery provides approximately 50 minutes of flight time under suitable conditions.
Q: Does it support GPS Follow and Return to Home?
Yes. WindVision Optic Pro supports GPS Follow, Fixed-Point Orbit, Trajectory Flight, Pull-Away Shot and Spiral Ascent. It also supports one-key, low-battery and signal-loss return.
Q: Which memory card should I use?
The drone supports MicroSD cards up to 128GB. Class 10, U1, V10 or faster cards are recommended.
Specifications
*Flight time and transmission distance are approximate and may vary depending on environment and operating conditions.
1. Tax
-No Customs Fees for USA and European Orders
Most parcels are shipped from local warehouses, so no customs fees are usually required.
- Customs Fees for South American and Southeast Asian Orders
Orders to South American and Southeast Asian countries are shipped from China and may incur import taxes as per local customs regulations.
2. Returns & Refunds
Eligible items can be returned within 30 days after delivery. Please keep the product and packaging in good condition.
3. Warranty & Support
For product questions, order information, or warranty support, please contact us through the Contact page.
Battery and charging help: If the battery does not charge normally, follow the drone battery charging checklist or contact TODAMU support before attempting another flight.
Calibration help: If the aircraft requests IMU, compass, or gimbal calibration, follow the drone calibration guide or contact TODAMU support before flying.
Is the camera horizon tilted?
Remove the gimbal cover, restart the drone on a firm level surface, and let the startup self-check finish. If the horizon remains tilted, use the gimbal alignment and calibration checklist.
GPS signal weak or home point not ready?
Move the drone to open sky, keep it still while it searches for satellites, and wait for the normal GPS-ready and home-point status. If the warning remains, use the TODAMU weak GPS signal checklist.

Collections
-
Drones with 3 Axis Gimbal
Drones with 3 axis gimbal are designed to deliver smoother and more...
-
Obstacle Avoidance Drones
Obstacle avoidance drones are built to improve flight safety by detecting and...